| Trimos TPR Tool Presetter
Long a shop floor standard, this hardened, versatile instrument insures accurate CNC tool presetting for the most demanding manufacturing tolerances.
Fowler -Trimos improved Tool presetter Series II features a high resolution display to 0.00005" /0.001mm and direct RS-232C output for printer or computer.
New functions include min/max/tir, preset recall and selection of radius or diameter display on the X axis.
The instrument is available in a range of capacities and can use a variety of ISO reduction adapters to accommodate specific tooling.
In addition, the min/max/tir feature allows runout and maximum cutting diameter checks with 30° detents.
Tool Presetter Features: |
Patented Sylvac Measuring System
2 Built in displays for X and Z axis tool setting
0.00005"/0.001mm or 0.0005"/0.01mm Resolution
Extra large LCD for easy viewing
Built-in Zero hard points for X and Z axes
Direct mm/Inch Conversion
50 and 40 taper models, with adapters for other sizes
360 Degree rotating tool pot
Min/Max/TIR Mode - Check tool runout!
Displays X axis in radius or diameter
Adjustable X column for increased capacity
Completely Self Contained - Battery operated
Direct RS-232 output - No interface required! |
Presetter Specifications:
X Coordinate Range: |
4"/100mm (max dia. 8"/200mm |
Z Coordinate Range: |
12"/300mm |
MaximumResolution: |
0.00005"/0.001mm |
SpindleConcentricity: |
0.0003"/0.0075mm |
Z-AxisSquareness: |
0.0004"/0.002mm |
X Coordinate Accuracy: |
Over 4"/150mm =0.0004" (0.005mm) |
Z Coordinate Accuracy: |
Over12"/400mm =0.0012" (0.010mm) |
Measuring System: |
Patented SYLVAC Capacitive |
Output Type: |
RS-232 C (Bi-directional) |
Measuring Speed: |
40"/sec. (1m/sec.) |
Display: |
LCDDisplay Height 0.335"/8.5mm |
Power Supply: |
3 V Lithium (1) #CR 2032 |
|
