Super Caliper Series 500

FEATURES:

With no annoying origin restoration necessary,
a measurement can be started any time
and there is no restriction on operating speed.

World's unique* solar-powered SuperCaliper
that is eco-friendly with no battery. *According to Mitutoyo investigation in January, 2005

The impact resistance of the display unit
has been increased for improved usability
in workshop conditions.

IP67 protection assures waterproof
reliability.

This SuperCaliper uses components that
do not contain harmful substances and is
compatible with RoHS Directives.

Supplied in fitted plastic case.

Technical Data
Accuracy: Refer to the list of specifications
(excluding quantizing error)
Resolution: 0.01mm or .0005"/0.01mm
Repeatability: 0.01mm / .0005”
Display: LCD
Length standard: ABSOLUTE electromagnetic induction linear
encoder Max. response speed: Unlimited
Battery: Solar battery*
Dust/Water protection level: IP67
*Can be used continuously above 60 lux ambient illumination.

Function
Origin-set, inch/mm conversion (inch/mm models)
Alarm: Counting value composition error

Optional Accessories
SPC cable with data switch (1m / 40”)
SPC cable with data switch (2m / 80”)

IP67 protection level
Level 6: Dust-tight
No ingress of dust.
Level 7: Protected against the effects of temporary
immersion in water.
Ingress of water in quantities causing harmful
effects shall not be possible when the enclosure
is temporarily immersed 1 meter in water under
standardized conditions of pressure and time
(30 min.).

About the charge function (Super Caliper)
The minimum illumination required in the uncharged state is 60 lux. As shown in the table ‘JIS Z 9110 Artificial Illumination Intensity Standard', this Super Caliper can be used without problems in a normal work environment. The charge function allows the operator to use this Super Caliper without interrupting work even if the ambient illumination is temporarily insufficient.
In the fully charged state this SuperCaliper can operate
for approximately an hour in an environment of 50lux
illumination (less than the minimum necessary illumination intensity). The time necessary for full charge differs, depending on the charging conditions. If this Super Caliper is left unused in an illumination of 500 lux (usual for manufacturing environments), it takes approximately one hour to reach full charge.