Offset Centerline Calipers - Series 573, 536-ABSOLUTE Digimatic and Vernier Type

FEATURES:

Specially designed for center to center distance measurements on the same and offset planes.

Can also measure from edge to center.

Hole diameter should be in the range of 1.5mm-10mm (.06"-.4").

With SPC data output. (series 573)

Supplied in fitted plastic case.

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models)
Resolution*: 0.01mm or .0005"/0.01mm
Graduation**: 0.05mm
Display*: LCD
Length standard*: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed*: Unlimited
Battery*: SR44 (1 pc.)
Battery life*: Approx. 3.5 years under normal use
*Digital models **Analog models

Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model
Data hold unit
SPC cable with data switch (1m/40”)
SPC cable with data switch (2m/80”)